Double-sided flexible PEI sheet 350mm

Advantages

• Flexible, detachable, holds very well on magnets
• Never deforms or rusts
• Easy handling of the first layer even for beginners
• Suitable surface for various filaments, especially PLA
• No cleaning necessary - just slightly bend the base and snap off the prints after cooling.
• Quick heating, shorter waiting time after printing.
• Long lifespan

Recommended Temperatures

• PLA - 60°C
• HTPLA - 60°C
• PETG - 70-80°C
• PCTG - 70-80°C
• ABS - 100°C

Product Usage Instructions

PETG/PCTG/TPU - If you are not careful when applying the first layer, PETG/PCTG/TPU may adhere to the PEI surface. This can damage the surface. To prevent surface damage, use hair spray or PVA glue before printing PETG/PCTG/TPU on PEI.

Removing Parts - Before removing parts, make sure the plate temperature is close to room temperature (less than 30°C). If you remove them while hot, there is a higher likelihood of damaging the surface. Gently bend the steel base. This procedure is simple and facilitates the removal of prints.

To degrease the surface, use for example IPA, do not use aggressive cleaners and solvents.

Parameters

• Dimensions: 355 x 355 mm
• Surface Material: PEI (Ultem1000, polyetherimide)
• Plate Material: spring stainless steel
• Maximum Temperature: 130 °C
• Color: black/gold