Devil Design PET-G beige

Filament Devil Design PET-G béžová (beige)
Filament Devil Design PET-G béžová (beige)

Devil Design PET-G beige


Filament PET-G (polyethylene terephthalate glycol) from the reliable Polish manufacturer Devil Design.
PETG is a combination of PET and different concentrations of glycol that makes it less brittle, brighter and easier to print.
PETG excels in strength, relatively high flexibility and offers higher heat resistance than PLA.  More

Manufacturer: Devil DesignProduct code: 767 Shipping and Payment

18,54 € incl. VAT
In stock
ks
(2 ks in stock)

Filament PET-G (polyethylene terephthalate glycol) from the reliable Polish manufacturer Devil Design.
PETG is a combination of PET and different concentrations of glycol that makes it less brittle, brighter and easier to print.
PETG excels in strength, relatively high flexibility and offers higher heat resistance than PLA.  More

Manufacturer: Devil DesignProduct code: 767 Shipping and Payment

PET-G (polyethylene terephthalate glycol) is a very popular printing material with universal applications. It can be said to provide the best of the PLA and ABS world. It is easy to print like PLA and at the same time is similarly rigid and has similar properties to ABS. Compared to PLA, it has a higher heat resistance, which greatly expands its functional applications as well. 

Nice rich red color with a glossy finish.

PETG is a combination of PET(polyethylene terephthalate) and different concentrations of glycol which makes it less brittle, brighter and easier to print. 

PETG is slightly hygroscopic (picks up moisture from the environment) so it needs to be dehumidified with a filament dehumidifier or stored in a dry environment when exposed to air for long periods of time.

The filament is wound on a spool, vacuum packed with a moisture absorber.

Features:

  • high strength
  • good layer adhesion
  • moderate elasticity
  • higher heat resistance than PLA
  • odourless
  • low tendency to warping
  • low shrinkage coefficient 
  • glossy surface

Recommendations for print:

  • Printing temperature: 235°C
  • Print surface: PEI, Glass+Lak, etc.
  • Substrate temperature: 80°C
  • Flow: 95%
  • longer and faster retraction
Parameters
Color Beige
Manufacturer Devil Design
Filament weight 1 Kg
Filament material PET-G
Compatible with AMS Partially compatible
Compatible with AMS Lite Yes
Filament diameter 1,75 mm
Heated bed temperature 70 - 80 °C
Hotend temperature 220 - 250 °C
Diameter tolerance ± 0,05 mm
Spool diameter 200 mm
Material surface Matt
Spool width 70 mm
Spool hole diameter 52 mm
Closed chamber Not required
Difficulty of printing Beginner
Glass transition temperature 80 °C
RAL Color 1014