Devil Design PET-G white
Devil Design PET-G white
Filament PET-G (polyethylene terephthalate glycol) from the reliable Polish manufacturer Devil Design. PETG is a combination of PET and different concentrations of glycol that makes it less brittle, brighter and easier to print.
PETG excels in strength, relatively high flexibility and offers higher heat resistance than PLA. More
Manufacturer: Devil DesignProduct code: 65 Shipping and Payment
Filament PET-G (polyethylene terephthalate glycol) from the reliable Polish manufacturer Devil Design. PETG is a combination of PET and different concentrations of glycol that makes it less brittle, brighter and easier to print.
PETG excels in strength, relatively high flexibility and offers higher heat resistance than PLA. More
Manufacturer: Devil DesignProduct code: 65 Shipping and Payment
PET-G (polyethylene terephthalate glycol) is a very popular printing material with universal applications. It can be said to provide the best of the PLA and ABS world. It is easy to print like PLA and at the same time is similarly rigid and has similar properties to ABS. Compared to PLA, it has a higher heat resistance, which greatly expands its functional applications as well.
Nice snow white color with a glossy finish.
PETG is a combination of PET(polyethylene terephthalate) and different concentrations of glycol which makes it less brittle, brighter and easier to print.
PETG is slightly hygroscopic (picks up moisture from the environment) so it needs to be dehumidified with a filament dehumidifier or stored in a dry environment when exposed to air for long periods of time.
The filament is wound on a spool, vacuum packed with a moisture absorber.
Features:
- high strength
- good layer adhesion
- moderate elasticity
- higher heat resistance than PLA
- odourless
- low tendency to warping
- low shrinkage coefficient
- glossy surface
Recommendations for print:
- Printing temperature: 235°C
- Print surface: PEI, Glass+Lak, etc.
- Substrate temperature: 80°C
- Flow: 95%
- longer and faster retraction
Color | |
---|---|
Manufacturer | Devil Design |
Filament weight | 1 Kg |
Filament material | PET-G |
Compatible with AMS | Partially compatible |
Compatible with AMS Lite | Yes |
Filament diameter | 1,75 mm |
Heated bed temperature | 70 - 80 °C |
Hotend temperature | 220 - 250 °C |
Diameter tolerance | ± 0,05 mm |
Spool diameter | 200 mm |
Material surface | Glossy |
Spool width | 70 mm |
Spool hole diameter | 52 mm |
Closed chamber | Not required |
Difficulty of printing | Beginner |
Glass transition temperature | 80 °C |
RAL Color | 9003 |