Super Lube DRI FILM Lubricant 330ml

Super Lube DRI FILM 330 ml is a dry PTFE spray lubricant for maintaining 3D printers and other precision mechanisms. It makes the most sense where you do not want a classic lubricant film, prefer a cleaner surface and want to reduce dirt build-up on the treated area.

Why it makes sense

• creates a dry protective layer after application
• PTFE helps reduce friction and wear
• does not leave a classic greasy film on the surface
• useful where you want to reduce dust and dirt build-up
• water-resistant formula according to the manufacturer

Where it fits best

Super Lube DRI FILM works best where you want a dry surface and do not want a classic lubricant that stays wet or greasy.

Typical use:

• selected moving parts of 3D printers
• mechanisms where a cleaner surface is desirable
• places where a regular lubricant would trap more dust and dirt
• applications where a thin dry layer makes more sense than a classic lubricant film

When to choose another variant

Not every lubrication job is the same. If you know what you are lubricating, you can choose better.

• If you want longer life from a classic lubricant and stronger adhesion on the surface, the Super Lube 85 g tube is usually better.
• If you want to treat a larger area quickly with a classic lubricant, the Super Lube 180 ml / 170 g spray makes more sense.
• If you need very precise dosing in a small spot, an oil applicator is usually the better choice.

How to apply

1. First clean the surface from old lubricant, dust and dirt.
2. Spray a thin layer onto the required area.
3. Let the layer settle briefly depending on the application.
4. Wipe away any excess or overspray outside the target area.

Where not to use it

DRI FILM is not a universal replacement for every lubricant.

• the device manufacturer recommends another lubricant type
• you need a classic grease with longer staying power
• you need very precise spot dosing without spray dispersion
• there is a risk of contact with belts, electronics, filament or the print surface

What to expect

This is the right choice for situations where you want a cleaner and drier surface rather than a classic lubricant film. Used in the right place, it helps improve movement and reduces the tendency of dirt to stick to the treated area.

Other Super Lube variants

• Super Lube 85 g, if you want longer service life and more precise dosing
• Super Lube 180 ml / 170 g, if you want fast and even spray application

Technical parameters

• package: 330 ml spray
• composition: synthetic dry PTFE lubricant
• colour: transparent
• temperature range: approx. -43 °C to 232 °C according to the manufacturer

FAQ

When does DRI FILM make more sense than a regular lubricant?

Mainly where you do not want a classic greasy film and prefer a cleaner surface with less dirt build-up.

Is it suitable for 3D printer maintenance?

Yes, mainly for places where a dry layer makes more sense than a classic lubricant.

Can it replace a tube or a classic spray in every case?

No. Each variant fits a slightly different type of use.

Why choose DRI FILM?

Because it gives you a cleaner surface, a dry layer and less tendency for dust and dirt to stick.