Fiberlogy Refill Easy PLA gray 0,85 kg
Fiberlogy Refill Easy PLA gray 0,85 kg
Easy PLA is a material that allows you to achieve prints of a very high quality and avoid complications during the printing process. No matter what level of experience in 3D printing you have, printing with EASY PLA is sure to encourage you to pursue even more ambitious and complex projects. All this thanks to the easiness of printing.
Refill is a spoolless filament that is compatible with the MASTERSPOOL reusable spool standard. Anyone can print the master spool thanks to the free Hotend design or the RichRap project. This solution is greener and slightly cheaper compared to filaments offered on disposable spools. More
Manufacturer: FiberlogyProduct code: 419 Shipping and Payment
Easy PLA is a material that allows you to achieve prints of a very high quality and avoid complications during the printing process. No matter what level of experience in 3D printing you have, printing with EASY PLA is sure to encourage you to pursue even more ambitious and complex projects. All this thanks to the easiness of printing.
Refill is a spoolless filament that is compatible with the MASTERSPOOL reusable spool standard. Anyone can print the master spool thanks to the free Hotend design or the RichRap project. This solution is greener and slightly cheaper compared to filaments offered on disposable spools. More
Manufacturer: FiberlogyProduct code: 419 Shipping and Payment
But what really matters in the end is the result. Your prints are sure to become something to show off among other 3D printing enthusiasts. After all, not everyone is able to achieve such printing precision.
Properties
- extremely easy to print
- biodegradable
- non-toxic
- virtually vapour and odour free
- very good adhesion between layers
- low temperature and chemical resistance
- relatively brittle and relatively weak
- suitable for beginners and children
Application
- Toys or their elements: human figures, animals, constructions, houses, vehicles, dice
- Gadgets or their elements: key rings, stands, phone cases
- Prototypes: new products, concept models
- Elements of jewelery: earrings, bracelets, beads, necklaces
- Decorations: Christmas tree ornaments, pendants
Recommended print settings by manufacturer
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
- Nozzle Temperature: 200-230°C
- Bed Temperature: 50-70°C
- Closed chamber: not required
- Fan: 75-100%
- Flowrate: 90-100%
- Printing Speed: < 100 mm/s
- Surface: glass, masking tape
- Retraction (direct): 2-3 mm
- Retraction (bowden): 4-6 mm
- Retraction Speed: 20-45 mm/s
- Drying conditions: 50°C / 4h
Notes
Easy PLA Aurora – recommended minimum 0,5 mm nozzle
Easy PLA White – due to the dye, the suggested minimum printing temperature is 230°C
Technical information
- Material: Polylactic acid (PLA)
- Diameter: 1,75 mm
- Weight: 850 g
- Diameter tolerance: +/- 0.02 mm
- Tolerance of roundness: +/- 0.01 mm
- Heat distortion temperature: 55 °C
- Melting point: 155-160 °C
- Glass transition temperature: 55-60 °C
Package
wound on spool, vacuum-packed in a plastic bag, placed in a cardboard box
Color | |
---|---|
Manufacturer | Fiberlogy |
Filament weight | 0,85 Kg |
Filament material | PLA |
Filament diameter | 1,75 mm |
Heated bed temperature | 50 - 70 °C |
Hotend temperature | 200 - 230 °C |
Diameter tolerance | ± 0,02 mm |
Spool diameter | 200 mm |
Material surface | Light gloss |
Spool width | 86 mm |
Spool hole diameter | 52 mm |
Closed chamber | Not required |
Difficulty of printing | Beginner |
Drying conditions | 50 °C / 4h |
Glass transition temperature | 55 - 60 °C |
Heat Distortion Temp | 55 °C |
Melting temperature | 155 - 160 °C |
Refill | Yes |