Fiberlogy R PET-G Refill anthracite (black) 0,85 kg
Fiberlogy R PET-G Refill anthracite (black) 0,85 kg
100% recycled filament
With PET-G properties you can make even more functional prototypes and end-use parts. This is possible thanks to its rigidity, which is better than that of ABS. Thanks to glycol compound, the material is more durable and less susceptible to shrinkage. Chemical resistance to acids, salts, and alkaline substances also widen the spectrum of its applications.
Refill is a spoolless filament that is compatible with the MASTERSPOOL reusable spool standard. Anyone can print the master spool thanks to the free Hotend design or the RichRap project. This solution is greener and slightly cheaper compared to filaments offered on disposable spools. More
Manufacturer: FiberlogyProduct code: 813 Shipping and Payment
100% recycled filament
With PET-G properties you can make even more functional prototypes and end-use parts. This is possible thanks to its rigidity, which is better than that of ABS. Thanks to glycol compound, the material is more durable and less susceptible to shrinkage. Chemical resistance to acids, salts, and alkaline substances also widen the spectrum of its applications.
Refill is a spoolless filament that is compatible with the MASTERSPOOL reusable spool standard. Anyone can print the master spool thanks to the free Hotend design or the RichRap project. This solution is greener and slightly cheaper compared to filaments offered on disposable spools. More
Manufacturer: FiberlogyProduct code: 813 Shipping and Payment
The translucent and non-translucent colour options available allow you to create amazing prints for different purposes. You can apply it to electronics, prototyping, and decorations. Choose the application you want to see the advantages of our PET-G.
Properties:
- high durability
- low shrinkage
- resistance to acids, salts, alkalic substances
Applications
- END-USE PARTS: containers, holders
- PROTOTYPES: bottles, packaging
- ELECTRONICS: covers, cases, products containing diodes
- DECORATIONS: lamps, glass-resembling elements
- JEWELLERY: rings, necklaces, bracelets
Recommended print settings by manufacturer
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
- Nozzle Temperature: 230-250°C
- Bed Temperature: 90°C
- Closed chamber: not required
- Fan: 0-25%
- Flowrate: 95-105%
- Printing Speed: 35-60 mm/s
- Surface: masking tape
- Retraction (direct): 2-3 mm
- Retraction (bowden): 3-5 mm
- Retraction Speed: 20-45 mm/s
- Drying conditions: 60°C / 4h
Notes
Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.
Technical information
- Material: polyethylene terephthalate glycol (PET-G)
- Diameter: 1,75 mm
- Weight: 850 g
- Diameter tolerance: +/- 0.02 mm
- Tolerance of roundness: +/- 0.01 mm
- Heat resistance: 71 °C
- Glass transition temperature: 88 °C
- Vicat softening temperature: 81 °C
Package
wound on spool, vacuum-packed in a plastic bag, placed in a cardboard box
| Color |  |
|---|---|
| Manufacturer | Fiberlogy |
| Filament weight | 0,85 Kg |
| Filament material | PET-G |
| Filament diameter | 1,75 mm |
| Heated bed temperature | 90 °C |
| Hotend temperature | 230 - 250 °C |
| Diameter tolerance | ± 0,02 mm |
| Spool diameter | 200 mm |
| Material surface | Glossy |
| Spool width | 86 mm |
| Spool hole diameter | 52 mm |
| Softening temperature | 81 °C |
| Closed chamber | Not required |
| Roundness tolerance | ± 0,01 mm |
| Difficulty of printing | Beginner |
| Drying conditions | 40 °C / 4h |
| Glass transition temperature | 88 °C |
| Heat Distortion Temp | 71 °C |
| Recycled filament | Yes |
| Refill | Yes |