Devil Design PET-G olive green

PET-G (polyethylene terephthalate glycol) is a very popular printing material with universal applications. It can be said to provide the best of the PLA and ABS world. It is easy to print like PLA and at the same time is similarly rigid and has similar properties to ABS. Compared to PLA, it has a higher heat resistance, which greatly expands its functional applications as well. 

Nice rich olive green color with a glossy finish.

PETG is a combination of PET(polyethylene terephthalate) and different concentrations of glycol which makes it less brittle, brighter and easier to print. 

PETG is slightly hygroscopic (picks up moisture from the environment) so it needs to be dehumidified with a filament dehumidifier or stored in a dry environment when exposed to air for long periods of time.

The filament is wound on a spool, vacuum packed with a moisture absorber.

Features:

• high strength
• good layer adhesion
• moderate elasticity
• higher heat resistance than PLA
• odourless
• low tendency to warping
• low shrinkage coefficient 
• glossy surface

Recommendations for print:

• Printing temperature: 235°C
• Print surface: PEI, Glass+Lak, etc.
• Substrate temperature: 80°C
• Flow: 95%
• longer and faster retraction