Bambu Lab Hotend with stainless steel nozzle 0.2 mm for A1 and A1 mini

For printing fine details and small models

This original hotend from Bambu Lab, equipped with a 0.2mm stainless steel nozzle, is a key component for all users of A1 and A1 Mini series printers who want to print models with a high level of detail. A nozzle with such a small diameter is suitable for printing objects with fine details, complex textures, or miniature objects where every micrometre counts.

The hotend is part of the quick-swap system (Quick Swap Nozzle Design), which is characteristic of the A1 series printers. Thanks to its special design with a magnetic attachment and a simple locking mechanism, you can swap the hotend in moments without complex disassembly. This not only simplifies maintenance but also allows you to flexibly switch between different nozzle diameters according to the current needs of your project.

Key Features 

• Printing fine details: The 0.2mm nozzle diameter allows for printing with thin lines and low layer height, which results in a smoother surface and the ability to reproduce even small model details.
• Suitable for miniatures and text: A good choice for printing figurines, jewellery, text, or complex architectural models.
• Quick-swap design: The entire hotend can be replaced easily and quickly, which minimises downtime and facilitates cleaning or replacement in case of clogging.
• Durable stainless steel: The stainless steel nozzle offers good wear resistance when printing standard materials like PLA, PETG, ABS, or ASA and is also resistant to corrosion.

Warnings and Recommendations

• Not for abrasive materials: This hotend with a stainless steel nozzle is not intended for printing filaments with abrasive additives (e.g., carbon or glass fibres). For these materials, a hardened steel nozzle must be used.
• Higher risk of clogging: Due to the small nozzle diameter, it is important to use high-quality and clean filaments to minimise the risk of clogging.
• Lower print speed: Printing with a 0.2mm nozzle is slower than with a standard 0.4mm nozzle due to the lower material flow rate.

Technical Specifications

• Manufacturer: Bambu Lab
• Compatibility: Bambu Lab A1, Bambu Lab A1 Mini
• Nozzle diameter: 0.2 mm
• Nozzle material: Stainless Steel
• Maximum temperature: 300 °C
• Length: 47.3 mm
• Package contents: 1x Hotend with 0.2mm nozzle, 2x mounting screw

Why choose this hotend?

This hotend with a 0.2mm nozzle is intended for users who specialise in printing miniature models and objects with a high degree of detail. The combination of thin extrusion and a convenient quick-swap system makes it a practical tool for expanding the capabilities of your A1 series printer.

For printing fine details and small models

This original hotend from Bambu Lab, equipped with a 0.2mm stainless steel nozzle, is a key component for all users of A1 and A1 Mini series printers who want to print models with a high level of detail. A nozzle with such a small diameter is suitable for printing objects with fine details, complex textures, or miniature objects where every micrometre counts.

The hotend is part of the quick-swap system (Quick Swap Nozzle Design), which is characteristic of the A1 series printers. Thanks to its special design with a magnetic attachment and a simple locking mechanism, you can swap the hotend in moments without complex disassembly. This not only simplifies maintenance but also allows you to flexibly switch between different nozzle diameters according to the current needs of your project.

Key Features

• Printing fine details: The 0.2mm nozzle diameter allows for printing with thin lines and low layer height, which results in a smoother surface and the ability to reproduce even small model details.
• Suitable for miniatures and text: A good choice for printing figurines, jewellery, text, or complex architectural models.
• Quick-swap design: The entire hotend can be replaced easily and quickly, which minimises downtime and facilitates cleaning or replacement in case of clogging.
• Durable stainless steel: The stainless steel nozzle offers good wear resistance when printing standard materials like PLA, PETG, ABS, or ASA and is also resistant to corrosion.

Warnings and Recommendations

• Not for abrasive materials: This hotend with a stainless steel nozzle is not intended for printing filaments with abrasive additives (e.g., carbon or glass fibres). For these materials, a hardened steel nozzle must be used.
• Higher risk of clogging: Due to the small nozzle diameter, it is important to use high-quality and clean filaments to minimise the risk of clogging.
• Lower print speed: Printing with a 0.2mm nozzle is slower than with a standard 0.4mm nozzle due to the lower material flow rate.

Technical Specifications

• Manufacturer: Bambu Lab
• Compatibility: Bambu Lab A1, Bambu Lab A1 Mini
• Nozzle diameter: 0.2 mm
• Nozzle material: Stainless Steel
• Maximum temperature: 300 °C
• Length: 47.3 mm
• Package contents: 1x Hotend with 0.2mm nozzle, 2x mounting screw

Why choose this hotend?

This hotend with a 0.2mm nozzle is intended for users who specialise in printing miniature models and objects with a high degree of detail. The combination of thin extrusion and a convenient quick-swap system makes it a practical tool for expanding the capabilities of your A1 series printer.