3DPower Silk pearl white

3DPower SILK - aesthetics above all!

The 3DPower SILK filament was created by combining PLA and PET-G in the appropriate proportions. As a result, the filament gained the shining characteristic of PET-G. In addition, the mechanical strength and impact strength are higher than in the case of ordinary PLA, while maintaining the ease of printing PLA. SILK filament is characterized by low shrinkage and no unpleasant odour. 3DPower SILK prints are characterized by excellent layer adhesion and very good detail reproduction.

The 3DPower SILK filament, thanks to its amazing gloss, is perfect for printing decorations or objects with high aesthetics. 3DPower SILK is available in color options imitating metals.

Why 3DPower SILK?

• The wealth of colors will allow you to create unique prints!
• Incredible shine
• No shrinkage
• Easy to print
• Great adhesion

Filament technical data

• Material: Polylactic acid (PLA), Polyethylene terephthalate glycol (PET-G)
• Diameter: 1.75mm
• Dimensional tolerance: ± 0.03mm
• Density: 1.24 g / cm³
• Net weight: 1kg
• Gross weight: 1.4kg
• Heat deflection temperature: 50 °C
• Vicat softening temperature: 51 °C
• Glass transition temperature: 57 °C

Spool dimensions

• Outer diameter: 200mm
• Mounting hole diameter: 52mm
• Width: 68mm

Recommended print settings by manufacturer

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

• Nozzle Temperature: 210 - 240°C
• Bed Temperature: 30 - 60°C
• Printing Speed: 40 - 100 mm/s
• Fan: 50 - 100%
• Chamber: not required

Package

Each spool is packed in a vacuum bag with a moisture absorber.