Fiberlogy HIPS black 0,85 kg
Fiberlogy HIPS black 0,85 kg
HIPS filament (High Impact Polystyrene) is a base in both meanings of this word: its properties allow it to be used as a basic filament and also as a support for other materials. Using it in printing will give you a light and good-looking print with a matt surface. You can polish it and even coat it with acrylic paint. This allows each model or miniature to look very tasteful. More
Product code: 430 Shipping and Payment
HIPS filament (High Impact Polystyrene) is a base in both meanings of this word: its properties allow it to be used as a basic filament and also as a support for other materials. Using it in printing will give you a light and good-looking print with a matt surface. You can polish it and even coat it with acrylic paint. This allows each model or miniature to look very tasteful. More
Product code: 430 Shipping and Payment
You can also decide to use it as a supporting material for prints that have large overhangs or non-standard shapes. You just need to immerse the print in D-limonene after this. It will dissolve the HIPS, leaving only the proper print.
Application
- Costumes or their elements: masks, parts of costumes, helmets
- Modeling: mock-ups, figures
- Prototypes: durable and lightweight elements
- Decorative elements: decorations, hanging elements, lamps
- Joining with other filaments: support for other prints
Properties
- Lighter than other materials
- Matt surface
- Soluble in D-limonene
- Can be polished, glued and covered with acrylic paint
Recommended print settings by manufacturer
- Nozzle Temperature: 230-245°C
- Bed Temperature: 80-100°C
- Closed chamber: recommended
- Fan: 0-10%
- Flowrate: 95-105%
- Printing Speed: 35-60 mm/s
- Surface: glass, masking tape
- Retraction (direct): 2-3 mm
- Retraction (bowden): 4-6 mm
- Retraction Speed: 20-45 mm/s
Technical information
- Material: High Impact Polystyrene > 96%, additives ≤ 4%
- Diameter: 1,75 mm
- Diameter tolerance: +/- 0.02 mm
- Tolerance of roundness: +/- 0.01 mm
- Weight: 850 g
- Heat distortion temperature: 83°C
- Vicat softening temperature: 90°C
- Glass transition temperature: 100°C
Package
wound on spool, vacuum-packed in a plastic bag, placed in a cardboard box
Color | |
---|---|
Manufacturer | Fiberlogy |
Filament weight | 0,85 Kg |
Filament material | HIPS |
Compatible with AMS Lite | Yes |
Filament diameter | 1,75 mm |
Heated bed temperature | 80 - 100 °C |
Hotend temperature | 230 - 245 °C |
Diameter tolerance | ± 0,02 mm |
Spool diameter | 200 mm |
Material surface | Matt |
Spool width | 86 mm |
Spool hole diameter | 52 mm |
Softening temperature | 90 °C |
Closed chamber | Recommended |
Difficulty of printing | Advanced |
Glass transition temperature | 100 °C |
Heat Distortion Temp | 83 °C |