Devil Design ABS+ gray
Devil Design ABS+ gray
Filament made of modified ABS for easier printability compared to conventional ABS. Proven for printing parts for Voron. More
Manufacturer: Devil DesignProduct code: 75 Shipping and Payment
Filament made of modified ABS for easier printability compared to conventional ABS. Proven for printing parts for Voron. More
Manufacturer: Devil DesignProduct code: 75 Shipping and Payment
ABS+ filament from the Polish manufacturer Devil Design is a material proven in terms of printing parts for 3D printers, especially Voron. It stands out for its easy printability compared to classic ABS even in less than ideal conditions for ABS printing.
Nice rich gray color with a light gloss.
ASA filament made of thermoplastic polymer material, for use in 3D printers in the FFF method. It is primarily intended for the production of functional prototypes and final products that are intended to have great weather resistance and durability, relatively high durability. The material does not change colour under the influence of UV radiation.
Filament is wound on a spool, vacuum packed with a moisture absorber.
Properties:
- high durability
- resistance to temperatures up to 94°C
- possibility of finished model machining
- low odour emission compared to ABS
- good printability compared to conventional ABS
- low material creep
Recommendations for printing Voron parts:
- Hotend temperature: 235-240°C (Can also be printed without all-metal hotend)
- Chamber temperature: 40°C+ (It is possible to print quite successfully outside the heated chamber if all recommendations are followed)
- Adhesive: PEI, Glass+Dimafix or other lack
- Heated bed temperature: 105°C for first layers, can be reduced later depending on surface/adhesive
- Flow: 92.5%
- Cooling: 20 - 40% (0 for printing outside the heated chamber)
Aplikace
- Koncepční a funkční prototypy
- Funkční díly s mechanickým zatížením, jako jsou díly 3d tiskáren.
- Výrobky pro koncové
Technické údaje
- Materiál: ABS+ (Akrylonitril-butadien-styren)
- Průměr: 1,75 mm
- Hmotnost: 1000 g
- Tolerance průměru: +/- 0,05 mm
- Tolerance kruhovitosti: +/- 0,02 mm
- Tepelná odolnost: do 96 °C
- Tvrdost: 105R
Color | |
---|---|
Manufacturer | Devil Design |
Filament weight | 1 Kg |
Filament material | ABS|ABS+ |
Compatible with AMS | Partially compatible |
Compatible with AMS Lite | Yes |
Recommended by Voron Community | Yes |
Filament diameter | 1,75 mm |
Heated bed temperature | 90 - 100 °C |
Hotend temperature | 230 - 240 °C |
Diameter tolerance | ± 0,05 mm |
Spool diameter | 200 mm |
Material surface | Light gloss |
Spool width | 70 mm |
Spool hole diameter | 52 mm |
Softening temperature | 94 °C |
Closed chamber | Recommended |
Hardness | 105R |
Roundness tolerance | ± 0,02 mm |
Difficulty of printing | Advanced |
RAL Color | 7037 |