Trianglelab V6 Hotend plated copper

Durable non-stick nozzle with high temperature performance. This copper alloy is highly resistant to high temperatures (up to 500 °C) making it ideal for printing materials that other nozzles cannot handle.

The hotend heating block is designed for maximum performance at high temperatures. Made from a special high-temperature copper alloy with a softening point well above 500 °C and greatly increased thermal conductivity, they are therefore ideal for high-temperature applications, working perfectly with common filaments such as PLA, PET-G, ABS, ASA, etc. and helping to maintain a more stable temperature when printing at higher speeds.

Applicable filaments

• Long life and excellent results with all common printing materials such as PLA, PET-G, ABS, ASA, PA, TPU, etc.
• Unique properties when printing high temperature materials such as PEEK, PEKK, PEI, PSU, PPSU etc.
• Occasional printing of abrasive materials with glass and carbon fibre or with wood or metal powder

Warning

If you plan to print materials that require temperatures above 290℃, replace the thermistor. We recommend using a PT100 or PT1000 resistive temperature sensor, which can be found in our shop.

Do not use the silicone sleeve for temperatures above 280℃.

Parameters

• Thermistor: ATC Semitec 104NT-4-R025H42G
• Type of heatbreak: all-metal
• Heating block material: plated copper
• Heatbreak material: titanium alloy
• Heatbreak power: 40W
• Heater voltage: 24V
• Type of heater: Standard
• Maximum temperature: 500°C

Flowrate

Comparison of the flow rates of the most common hotends

• ~10-12mm3/s for V6, CHC
• ~14-16mm3/s for SF Dragon, DragonFly and a little bit higher on a SF Mosquito
• ~20-30mm3/s for HF Dragon or Mosquito
• ~30-40mm3/s for Volcano or Nova
• ~80-90mm3/s for Mosquito Magnum+ 
• ~110mm3/s for SuperVolcano 

Compatible:

• Compatible with all V6 HOTEND interfaces
• Compatible with Prusa I3 MK3/MK3S
• Compatible with Titan Extruder
• Compatible with DDB Extruder
• Compatible with Voron Afterburner, Voron Strealthburner

What's in the box:

• 1x V6 plated copper nozzle 0.4 mm
• 1x V6 plated copper heating block
• 1x Heatbreak made of titanium alloy
• 1x V6 heat sink
• 1x 3010 fan
• 1x Fan holder
• 1x Heating element 6x20mm 40W
• 1x Thermistor 104GT-2
• 1x Silicone sock

Comparison of nozzle parameters