Magigoo Supergrip 50 ml build plate adhesive

Magigoo Supergrip is a 3D printing adhesive for flexible and coated build plates. It suits home printers and workshops using smooth or textured PEI, PC or satin sheets that need reliable first-layer adhesion. The 50 ml bottle has an integrated applicator for spreading a thin layer directly onto a cold build plate.

For flexible plates and common filaments

Supergrip supports PLA, PETG, ABS, ASA, TPU and HIPS. Its water-based formula helps release prints once the plate has cooled. Residue can be cleaned with water and a damp cloth.

For PLA, the manufacturer reports adhesion at bed temperatures as low as 45 °C. Adjust settings to your filament and build surface; for other materials, follow the filament manufacturer's recommended bed temperature.

How to use Supergrip

1. Shake the bottle for 3 to 5 seconds.
2. Gently press the applicator against a clean, cold build plate and spread a thin, even layer. Do not squeeze the bottle with the applicator exposed.
3. Heat the bed to the temperature required by your filament and start printing. There is no need to wait for the adhesive to dry after application.
4. After printing, let the plate cool. Gently flex the plate to release the print. If it resists, allow more cooling time.
5. Clean the plate with water and a damp cloth as needed, then renew the thin adhesive layer.

Specifications

Documentation

• Magigoo Supergrip manufacturer instructions (PDF, English)