Bondtech CHT BiMetal coated nozzle 0.8
Bondtech CHT BiMetal coated nozzle 0.8
Bondtech CHT 0.8mm are nozzles for applications where high flow rates when printing abrasive material.
This is not just cheap marketing but a technological innovation proven in practice.
The main advantages of Bondtech CHT:
Higher melting capacity by increasing the heating wall area
High durability against abrasive materials
25-65% higher flow
Manufactured with extreme precision
BiMetal with nickel-coated surface, hardened steel insert, brass body
Complies with RepRap M6 nozzle standards More
Manufacturer: BondtechProduct code: 727 Shipping and Payment
Bondtech CHT 0.8mm are nozzles for applications where high flow rates when printing abrasive material.
This is not just cheap marketing but a technological innovation proven in practice.
The main advantages of Bondtech CHT:
Higher melting capacity by increasing the heating wall area
High durability against abrasive materials
25-65% higher flow
Manufactured with extreme precision
BiMetal with nickel-coated surface, hardened steel insert, brass body
Complies with RepRap M6 nozzle standards More
Manufacturer: BondtechProduct code: 727 Shipping and Payment
Bondtech CHT BiMetal RepRap Coated Nozzle Advantages
- Abrasive-proof to work with Carbon and Glass fiber composite materials;
- Higher melt capacity by increasing the surface area of the heating walls
- Flow Rate gains between 25 and 65%
- Competitive price/performance price
- Machined with ultra-precision
- Copper body and Hardened Steel inserts nozzle with Nickel coated surface
- Follows nozzle standard: RepRap M6 (M6×1×7.5×12.5)
- May be used with 1.75 or 2.85mm hotends.
- Flow Rate gains may vary. Results depend on the hardware, materials and print settings used
Bondtech CHT BiMetal RepRap Coated Nozzle Features
- Copper body
- Hardened Steel inserts
- Nickel Coating
- 1 unit per pack
- Available sizes: 0.40, 0.60, 0.80, and 1.0 mm
- Optimized for 1.75mm filament
- Compatible with 2.85mm filament.
- Requires 6mm wrench
Warning
Avoid Cold Change Of Bondtech CHT Nozzles
Copper is a soft material and doesn't withstand high mechanical efforts.
Before removing or tightening any Bondtech CHT nozzle, heat it up to 280C, or at least above 250C.
Use at most 1.0 Nm torque. Recommended Torque is 0.5 Nm.
Size limitation for fiber loaded filaments
For Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.
For particle loaded filaments
For metal, wood, glitter or other particle loaded abrasive filaments you may use the 0.4mm nozzle size.
SKU: 600-A-CHT-MOS-175-80
Color | |
---|---|
Manufacturer | Bondtech |
Recommended by Voron Community | Yes |
Country of origin | Sweden |
Filament diameter | 1,75 mm |
Nozzle diameter | 0,8 mm |
Maximum temperature | 450 °C |
Dimensions | 12,5 x 7 mm |
Material | Plated brass |
Hotend system | V6 |
Thread | M6 |