Fillamentum PET-G gold cloud
Fillamentum PET-G gold cloud
Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing.
Fillamentum PETG is an ideal material for prints with practical applications.
High transparency and gloss
Low warping and shrinkage
Flexural resistance
High strength and hardness
Temperature resistance up to 70 °C More
Manufacturer: FillamentumProduct code: 790 Shipping and Payment
Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing.
Fillamentum PETG is an ideal material for prints with practical applications.
High transparency and gloss
Low warping and shrinkage
Flexural resistance
High strength and hardness
Temperature resistance up to 70 °C More
Manufacturer: FillamentumProduct code: 790 Shipping and Payment
Features:
- Low warping and shrinkage
- Great layer adhesion
- High strength & good hardness
- Flexural resistance
- Temperature resistance up to 70 °C
- Low fumes released
- Chemical resistance against water, acids, alkalis, and alcohols
- Transparency and gloss
- Safe for food contact applications according to EU regulation
- Safe for food contact applications according to U.S. FDA regulation – all the colour versions comply except “Black“, “Yellow“, “Vertigo Grey” and “Wizard’s Voodoo”
- Safe to use in electrical and electronic equipment
- Recyclable & BPA-free & styrene-free
Print settings suggested by manufacturer
- Printing temperature: 235 - 255 °C
- Heated bed temperature: 65-75 °C
- Speed: 40 - 60 mm/s
- Part cooling fan: 0 - 30%
- Heated bed surface: PEI, mirror/glass
- Adhesive: PVA glue, 3DLac, Magigoo
- Raft / skirt / brim: skirt / brim 5 mm
- Heated chamber / enclosure: not needed
- Drying: 65 °C / 4h
Cooling
It is not recommended to use more than 30% of fan speed, as fast cooling could lead to improper layer bonding. We recommend using no cooling for standard objects, which leads to stronger parts. For bridges and big overhangs, it is possible to go up to 50% for the desired layer.
Storing
Airtight bag with desiccant.
In the case of moist material, re-dry it in an appropriate device. The conditions to achieve an optimal level of moisture are 65 °C for 4 hours. Processing of moist filament may cause degradation of polymer chains, brittleness, poor layer adhesion, stringing, oozing, etc.
Technical information
- Material: polyethylene terephthalate glycol (PETG)
- Color: gold cloud, glitter
- Diameter: 1,75 mm
- Weight: 750 g
- Diameter tolerance: +/- 0.05 mm
- Heat distrotion temperature: 70 °C
- Vicat softening temperature: 75 °C
Comparison of polymers from Fillamentum
PE CF112 Carbon | CPE HG100 | PETG | |
---|---|---|---|
Impact resistance | 106 kj/m2 | no break (notched) | 85 J/m |
Tensile strength | 52 MPa | 48 MPa | 50 MPa |
Elongation at break | 8 % | 150 % | 120 % |
Hardness | 94 R-Scale | 115 R-Scale | 105 R-Scale |
Flexural strength | - | 71 MPa | 71 MPa |
Flexural modulus | - | 1860 MPa | 1860 MPa |
Wear resistance | ★★★★ | ★★ | ★ |
Creep resistance | ★★★★ | ★★ | ★ |
Heat resistance (HDT) | up to 100 °C | 80 °C | 70 °C |
Chemical resistance to acids, bases, hydrocarbons | good | good | poor |
Color | |
---|---|
Manufacturer | Fillamentum |
Filament weight | 0,75 Kg |
Filament material | PET-G |
Compatible with AMS | Yes |
Compatible with AMS Lite | Yes |
Country of origin | Czech Republic |
Filament diameter | 1,75 mm |
Heated bed temperature | 65 – 75 °C |
Hotend temperature | 235 – 255 °C |
Diameter tolerance | ± 0,05 mm |
Spool diameter | 200 mm |
Material surface | Glossy |
Spool width | 55 mm |
Spool hole diameter | 52 mm |
Softening temperature | 75 °C |
Closed chamber | Not required |
Hardness | 105R |
Difficulty of printing | Beginner |
Drying conditions | 65 °C / 4h |
Heat Distortion Temp | 70 °C |
Filament characteristics | Třpytivý |
Length of filament | 244 m |