Fillamentum Flexfill TPE 90A sky blue
Fillamentum Flexfill TPE 90A sky blue
Fillamentum Flexfill TPE 90A is flexible filament based on polyolefinic thermoplastic elastomer with hardness 90 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.
Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.
Certified for food contact and skin contact applications. More
Manufacturer: FillamentumProduct code: 796 Shipping and Payment
Fillamentum Flexfill TPE 90A is flexible filament based on polyolefinic thermoplastic elastomer with hardness 90 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.
Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.
Certified for food contact and skin contact applications. More
Manufacturer: FillamentumProduct code: 796 Shipping and Payment
New member of Fillamentum Flexfill family is unique in its properties in comparison with Flexfill TPU materials.
The main difference caused by the very different polymer base is in chemical resistance. It has chemical resistance against wide range of substances. This makes it perfect material for sealings of most of substances even at higher temperatures. This material has very low gas permeability.
Flexfill TPE’s mechanical behaviour is influenced by the necking creating while stressed in tensile. This filament has great flexibility. High tear resistance is insured thanks to good layer adhesion.
The surface of material is very pleasant to touch. Thanks to its great layer adhesion, the objects have very smooth surface. This finish is great to avoid any sticking of dirt.
This material can be used for production of electrical and electronic equipment. It doesn’t contain the restricted substances. The filament complies with the requirements for food contact applications. It is safe for applications in contact with skin or mucous membrane.
For flexible materials, Fillamentum can guarantee maximum deviation of diameter +/- 0,10 mm. During the production, filament is made with the best stability of diameter, roundness and colour.
Features:
- Safe for food-contact and skin-contact applications
- Dimensional stability
- Smooth matte finish
- Pleasant to touch
- Tear strength, abrasion resistance
- Chemical resistance against acids, alcohols, alkalis, and water
- Resistant against dirt, washable
- Recyclable
- BPA-free
- Low odor
- Safe to use in electrical and electronic equipment
Print settings suggested by manufacturer
- Printing temperature: 225 – 245 °C
- Heated bed temperature: 50 – 60 °C
- Speed: 15 – 25 mm/s depending on Shore hardness, lower Shore needs to be printed slowly)
- Part cooling fan: 50 – 100 %
- Heated bed surface: PEI, mirror / glass
- Adhesive: Magigoo PP, 3DLac, blue tape
- Brim recommended
- Heated chamber / enclosure: not needed
- Extrusion multiplier: 1 – 1.1
Adhesion
The best results were achieved while using Magigoo PP, which ensures perfect adhesion. It is recommended to use brim around the object.
Bridges and overhangs
Overhangs can be printed very well. Bridges can be little bit challenging. From start, it’s better to use supports.
Printing speed
Regarding the Shore hardness, slow is the key. The softer material the lower speed is required.
Storing
Airtight bag with desiccant.
Technical information
- Material: Thermoplastic elastomer based on polyolefins
- Color: sky blue (RAL 5015)
- Diameter: 1,75 mm
- Weight: 500 g
- Diameter tolerance: +/- 0.1 mm
- Hardness: 90A/30D
Flexfill TPU | Flexfill TPE | Flexfill PEBA | |
---|---|---|---|
Polymer base | Polyurethane + ester | Polyolefin + SEBS | Polyamide + ether |
Tensile strength | 49 MPa | 5 MPa | 36 MPa |
Elongation on break | 600 % | 250 % | > 1000 % |
Density | 1.20 g/cm3 | 1.15 g/cm3 | 1.00 g/cm3 |
Sensitivity to moisture | High | Low | High |
Chemical resistance | Oils, greases, ozone | Water, acids, alcohols, alkalis | Car fluids, toluene, acetone, ozone |
Food & skin contact | Not recommended | Certificated | Not certificated |
Gas permeability | High | Low | Medium |
Optical properties | Glossy, transparent | Matte, non-translucent | Glossy, very transparent |
For example, ideal for applications | |||
Vibration | Anti-vibration, damping | Anti-vibration, damping | Vibration and energy transfer |
Skin contact | - | Long-term touch of human skin (holding in hands) | - |
Under temperature | +80–100 ° | +80 °C | -40 °C |
In contact with | oils | water | car fluids |
Abrasion | Sliding abrasion | - | Impingement abrasion |
Other | – | Outdoor | Low density |
– | – | Rebounding |
Color | |
---|---|
Manufacturer | Fillamentum |
Filament weight | 0.5 kg |
Filament material | TPE |
Compatible with AMS | Yes |
Compatible with AMS Lite | Yes |
Filament diameter | 1,75 mm |
Heated bed temperature | 50 - 60 °C |
Hotend temperature | 225 - 245 °C |
Diameter tolerance | ± 0,1 mm |
Spool diameter | 200 mm |
Material surface | Mat |
Spool width | 55 mm |
Spool hole diameter | 52 mm |
Closed chamber | Not required |
Hardness | 30D|90A |
Difficulty of printing | Advanced |
Length of filament | 170 m |
RAL Color | 5015 |