Trianglelab Rapido Hotend UHF

Rapido hotend has a unique copper alloy cylindrical melting zone wrapped in a high-powered ceramic heating element so that it has a more uniform heating section and a shorter heat transfer path. Therefore, greater flow and heating efficiency can be achieved.

The thin-walled surgical-grade stainless steel heat breaker and three titanium screws make the entire structure more robust. With the heat sink firmly in place, the nozzle can be changed with one hand, and the heat breaker will not be easily damaged by collisions during printing.

The detachable groovemount adapter allows for dual use of groove mount and screw mount. The rapido hotend has 16mm bolt circle diameter mounting screw hole same as the dragon hotend. Pre-set nozzle thread depth keeps leaks from happening again.

The rapido hotend has the same overall dimensions as the Volcano hotend with V6 or compatible nozzles installed by default. it can be used as a direct replacement for the Volcano hotend while having a higher flow rate (up to 45mm³/s) and the same extrusion accuracy than the Volcano.When the rapido hotend is fitted with a volcano nozzle and melting zone extender, it has a even higher flow rate (up to 75mm³/s) while maintaining a relatively small size and weight.

Highlights and Innovations

• New heatblock design features a larger melt zone to suit the demands of high speed and high temperature printing.
• Evenly heated thanks to cylindrical ceramic heating unit
• Integral frame rigid structure of titanium alloy screws makes lower heat conductivity possible, and realize the function of one-handed nozzle change.
• Thin-walled heatbreak, eliminating heat creep and clogging, while realizing an excellent thermal insulation.
• Unique structure design makes fast switching between high flow and ultra-high flow printheads possible.
• Interchangeable design of different types of nozzles suit the demands of high temperature and fiber filaments printing

High Heater Capacity

• High power cylindrical ceramic heating element up to 115W
• 24℃-280℃ less than 51 seconds

Compatibility

• Compatible with all thermoplastic filaments, including but not limited to typical composite fiber filaments such as PLA, ABS, PETG, TPU, PP, PA and PLA-CF, ABS-CF, PETG-CF, PA-CF/GF, as well as composite filaments such as steel, wood, boron carbide, tungsten and fluorescence
• Compatible with all V6 nozzles
• V6 compatible mounting with included adapter, designed with PRUSA printers in mind

Package content

• Rapido-hotend Pre-assembled x1
• Groove Mount Adapter x1
• M2.5x5 screws x4
• M2.5x8   screws x4
• Tube Collet with Clips x2
• T-V6 Plated Copper Nozzle 0.4 mm x1
• Hexagon Wrench kit x1
• Silicone Sock x1
• Thermistor extension cable x1
• Heater extension cable x1

Material

• Aluminium heat sink
• High temperature resistant copper nozzle
• Plated copper extended heat block
• Titanium alloy support bolts