Phaetus plated copper nozzle 0.6
Phaetus plated copper nozzle 0.6
The most pragmatic choice is a plated copper alloy nozzle. Copper has a very high thermal conductivity and provides the most stable temperature for the filament even at higher printing speeds and temperatures. Maximum printing temperature of 500 °C is sufficient for all common filaments.
Nickel plating means significantly longer life than a brass nozzle and trouble-free occasional printing even of abrasive materials. Surface is outstanding for its low adhesion.
Phaetus nozzles are proven quality from internal polishing, precision to plating quality.
Hardness (Mohs): 6
Maximum printing temperature: 500℃
Thermal conductivity: 330W/mk
Coefficient of expansion: 16.7 μm/m℃ More
Manufacturer: PhaetusProduct code: 228 Shipping and Payment
The most pragmatic choice is a plated copper alloy nozzle. Copper has a very high thermal conductivity and provides the most stable temperature for the filament even at higher printing speeds and temperatures. Maximum printing temperature of 500 °C is sufficient for all common filaments.
Nickel plating means significantly longer life than a brass nozzle and trouble-free occasional printing even of abrasive materials. Surface is outstanding for its low adhesion.
Phaetus nozzles are proven quality from internal polishing, precision to plating quality.
Hardness (Mohs): 6
Maximum printing temperature: 500℃
Thermal conductivity: 330W/mk
Coefficient of expansion: 16.7 μm/m℃ More
Manufacturer: PhaetusProduct code: 228 Shipping and Payment
In the process of 3D printing, PEEK, PEKK, PEI, PSU, PPSU and other filaments who can be melted above 300℃ are called high-temperature filaments. The ordinary brass nozzle cannot complete its printing. The thermal conductivity of the nozzle made of copper alloy is 330W/m.k, and the maximum printing temperature can reach 500℃, which can solve the problem of rapid heating of high-temperature filaments and continuous printing, effectively extending the service life of the nozzle.
Advantage
- Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
- High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
- Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
- Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
- Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
Applicable filament
Working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
Product features
- Nozzle diameter: 0.4 mm
- Filament diameter: 1.75 mm
- Thread: M6
- Color: silver
- Material: plated copper alloy
- Min. Orifice Diameter: φ0.25
- Tolerance: ±0.01mm
- Inner Hole Roughness: ≤Ra0.4μm
- Concentricity: ≤0.02mm
- Hardness (Mohs): 6
- Maximum Printing Temperature: 500℃
- Thermal Conductivity: 330W/mk
- Expansion Coefficient: 16.7μm/m℃
