Omron Inductive proximity sensor TL-Q5MC2-Z NPN NC

Notice

This is a "B" class Omron sensor that saves significant amount of money while working well enough for the purpose of auto bed leveling.

Parameters

• Sensing head size: 17 mm x 17 mm x 28 mm
• Type: Square type, Unshielded
• Power source: DC Three-wires models
• Sensing distance: 5 mm ±10%
• Setting distance: 0 to 4 mm
• Differential distance: 10% max. of sensing distance
• Sensing object: Ferrous metal (Sensitivity lowers with non-ferrous metals.)
• Standard sensing object: Iron 15 x 15 x 1 mm
• Response frequency: 500 Hz (Average value)
• Response time: 2 ms max.
• Power supply voltage: 12 to 24 VDC ripple (p-p) 10% max.
• Operating voltage range: 10 to 30 VDC
• Current consumption: at 24 VDC: 10 mA max.
• Control output (Output type): NPN open collector
• Control output (Switching capacity): 50 mA max. (30 VDC max.)
• Control output (Residual voltage): 1 V max. (Load current 50 mA with cable length of 2 m)
• Indicator: Detection indicator (red)
• Operation mode: NC
• Protective circuit: Reverse polarity protection, Surge suppressor
• Ambient temperature (Operating): -25 to 70 ℃
• Ambient temperature (Storage): -25 to 70 ℃
• Ambient humidity (Operating): 35 to 95% RH
• Ambient humidity (Storage): 35 to 95% RH
• Temperature influence: ±20% max. of sensing distance at 23 ℃ in the temperature range of −25 to 70 ℃
• Voltage influence: ±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
• Insulation resistance: Between charged parts and the case: 5 MΩ min. (at 500 VDC)
• Dielectric strength: Between charged parts and the case: 500 VAC 50/60 Hz 1 min
• Vibration resistance: Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
• Shock resistance: Destruction: 200 m/s2 10 times each in X, Y, and Z directions
• Degree of protection IEC: IP67
• Connection method: Pre-wired models (2 m)
• Weight: Package: Approx. 90 g
• Material: Case: Heat-resistant ABS resin Sensing surface: Heat-resistant ABS resin