Double-sided flexible PEI sheet 300mm
Double-sided flexible PEI sheet 300mm
High-quality double-sided PEI printing pad - WITHOUT MAGNETIC MAT in an elegant black color.
One side smooth
The other side rough black textured surface. More
Manufacturer: Formbot 3DProduct code: P00004 Shipping and Payment
High-quality double-sided PEI printing pad - WITHOUT MAGNETIC MAT in an elegant black color.
One side smooth
The other side rough black textured surface. More
Manufacturer: Formbot 3DProduct code: P00004 Shipping and Payment
Advantages
- Flexible, detachable, holds very well on magnets
- Never deforms or rusts
- Easy handling of the first layer even for beginners
- Suitable surface for various filaments, especially PLA
- No cleaning necessary - just slightly bend the base and snap off the prints after cooling.
- Quick heating, shorter waiting time after printing.
- Long lifespan
Recommended Temperatures
- PLA - 60°C
- HTPLA - 60°C
- PETG - 70-80°C
- PCTG - 70-80°C
- ABS - 100°C
Product Usage Instructions
PETG/PCTG/TPU - If you are not careful when applying the first layer, PETG/PCTG/TPU may adhere to the PEI surface. This can damage the surface. To prevent surface damage, use hair spray or PVA glue before printing PETG/PCTG/TPU on PEI.
Removing Parts - Before removing parts, make sure the plate temperature is close to room temperature (less than 30°C). If you remove them while hot, there is a higher likelihood of damaging the surface. Gently bend the steel base. This procedure is simple and facilitates the removal of prints.
To degrease the surface, use for example IPA, do not use aggressive cleaners and solvents.
Parameters
- Dimensions: 305 x 305 mm
- Surface Material: PEI (Ultem1000, polyetherimide)
- Plate Material: spring stainless steel
- Maximum Temperature: 130 °C
- Color: black/gold