Devil Design ASA black
Devil Design ASA black
ASA filament (acrylonitrile-styrene-acrylate) has a wide range of applications and thanks to the fact that it is a UV stable thermoplastic it is also suitable for outdoor use. Devil Design's ASA printing filament is proven for printing parts for Voron. Easy to print. More
Manufacturer: Devil DesignProduct code: 44 Shipping and Payment
ASA filament (acrylonitrile-styrene-acrylate) has a wide range of applications and thanks to the fact that it is a UV stable thermoplastic it is also suitable for outdoor use. Devil Design's ASA printing filament is proven for printing parts for Voron. Easy to print. More
Manufacturer: Devil DesignProduct code: 44 Shipping and Payment
ASA filament from the Polish manufacturer Devil Design is a material proven in terms of printing parts for 3D printers, especially Voron. It stands out for its easy printability even at lower temperatures.
Nice rich black color with a light gloss.
ASA filament made of thermoplastic polymer material, for use in 3D printers in the FFF method. It is primarily intended for the production of functional prototypes and final products that are intended to have great weather resistance and durability. The material does not change colour under the influence of UV radiation.
Filament is wound on a spool, vacuum packed with a moisture absorber.
Properties:
- high UV resistance
- high durability
- lasting colours
- resistance to temperatures up to 96°C
- possibility of finished model machining
- low odour emission compared to ABS
- low material creep
Recommendations for printing Voron parts:
- Hotend temperature: 240-245°C (Can also be printed without all-metal hotend)
- Chamber temperature: 40°C+ (It is possible to print quite successfully outside the heated chamber if all recommendations are followed)
- Adhesive: PEI, Glass+Dimafix or other lack
- Heated bed temperature: 105°C for first layers, can be reduced later depending on surface/adhesive
- Flow: 92.5%
- Cooling: 20 - 40% (0 for printing outside the heated chamber)
Applications
- Conceptual and functional prototypes
- Functional parts with mechanical loads, such as 3D printer parts.
- Products for end-use and outdoor applications
Technical data
- Material: ASA
- Diameter: 1.75 mm
- Weight: 1000 g
- Diameter tolerance: +/- 0.05 mm
- Roundness tolerance: +/- 0.02 mm
- Heat resistance: up to 96 °C
Color | |
---|---|
Manufacturer | Devil Design |
Filament weight | 1 Kg |
Filament material | ASA |
Compatible with AMS | Partially compatible |
Compatible with AMS Lite | Yes |
Recommended by Voron Community | Yes |
Filament diameter | 1,75 mm |
Heated bed temperature | 90 - 100 °C |
Hotend temperature | 230 - 240 °C |
Diameter tolerance | ± 0,05 mm |
Spool diameter | 200 mm |
Material surface | Light gloss |
Spool width | 70 mm |
Spool hole diameter | 52 mm |
Softening temperature | 96 °C |
Closed chamber | Recommended |
Hardness | 107R |
Roundness tolerance | ± 0,02 mm |
Difficulty of printing | Advanced |