3D Sphynx PC Blend GF20 black 0,8 kg

3D Sphynx PC Blend GF20: Maximum Performance for Demanding Applications

3D Sphynx PC Blend GF20 is a highly durable technical filament made from a modified blend of polycarbonate (PC) and other technical polymers, reinforced with 20% glass fibres. This advanced blend provides exceptional strength, thermal stability, and dimensional stability, making it ideal for demanding technical and industrial applications.

If your projects require a material that can withstand high mechanical loads, thermal stress, and at the same time maintain precise dimensions, 3D Sphynx PC Blend GF20 is designed precisely for these purposes.

Key Properties

• High mechanical strength and stiffness:

  • Tensile strength reaches up to 100 MPa and the tensile modulus is 6000 MPa. These parameters ensure the reliability of parts even under intensive mechanical loading.

• Thermal resistance up to 150 °C:

  • Thanks to high Vicat softening temperature and HDT (Heat Deflection Temperature) values, this filament is also suitable for parts exposed to significant thermal stress.

• Excellent impact resistance:

  • The contained glass fibres increase the material's impact strength and the strength of prints in critical areas.

• Dimensional stability and low shrinkage:

  • An excellent choice for printing structural parts where precise dimensions without unwanted deformations are required.

• Chemical resistance:

  • The material is resistant to oils, cleaning agents, and common industrial chemicals.

Important Instructions for Successful Printing

• Printing in an enclosed chamber is a necessity: To achieve high-quality results and optimal mechanical properties of prints, an enclosed print chamber is required.
• Recommendation for maximum performance: To achieve the best results, especially regarding interlayer adhesion and elimination of internal stress in the material, we recommend actively heating the print chamber to a temperature above 60 °C.
• Material abrasiveness: Glass fibres make this filament abrasive. It is necessary to use a wear-resistant nozzle.

Recommended Print Settings and Technical Specifications

• Material: Modified blend of polycarbonate (PC) and other technical polymers, reinforced with 20% glass fibres
• Filament Diameter: 1.75 mm ± 0.05 mm
• Weight: 800 g
• Nozzle Temperature: 290–310 °C
• Bed Temperature: 100–120 °C
• Print Speed: Max. 90 mm/s (it is recommended to start with lower values and optimise)
• Cooling (Part Fan): 0–25 %
• Flow Rate: 0.85–0.95 (may require individual calibration)
• Brim/Raft: Brim is recommended to improve bed adhesion.
• Nozzle: It is essential to use a wear-resistant nozzle (hardened steel, ruby, carbide-tipped).

Areas of Use

• Industrial parts and enclosures
• Automotive components
• Electronic housings
• Functional prototypes with high mechanical and thermal loads

Storage

Store the filament in a dry place, as moisture negatively affects layer adhesion and the final mechanical properties of prints. It is recommended to store it in a resealable container with a desiccant (e.g., silica gel).

Try 3D Sphynx PC Blend GF20 and achieve professional results with a filament designed for maximum performance in demanding applications.